We manufacture printed & non-printed 3-piece round tin cans fabricated from electrolytic tinplate imported from Japan, Europe, India, Korea, China & Malaysia. These cylindrical cans are used mainly for packaging of milk powder, juice powder, ghee, edible oils, oats, custard powder, baking powder, coffee, tomato powder, adhesives and lubricating oils. The cans are supplied to the customer with the cylindrical body and one end (closure selection depending upon customers' needs) seamed with the other end supplied loose for seaming at customers' end. We manufacture a wide range of cylindrical cans with capacities ranging from 70 g to 2.75 kg. Typical cans supplied are depicted in the table on the following page.
|Capacity||Standard Size||Diameter (mm)||Height (mm)||Closures|
|Milk powder||400 g||401||99||126||RLT/PO/EOE|
|2 kg||509||138||171||LID TOP|
|4 kg||700||175||210||LID TOP|
|Custard/ pow||285/ 300 g||307||84||106||RLT|
|Tomato powder||1 KG||401||99||210||RLT|
|Adhesives||250 ml||301||74||71||LID TOP|
|500 ml||401||99||98||LID TOP|
|Lubricating oil||1 ltr||401||99||147||Bottom/EOE|
|Round||1 ltr Round||401||148mm||EOE|
|1 ltr Round||307||205||EOE|
|1 ltr Round||404||130mm||Double Ticlid|
|Rectangular||1 ltr Rectangular||Rectangular||168mm||Spout|
|3 ltr Rectangular||Rectangular||185mm||Spout|
|4 ltr Rectangular||Rectangular||250mm||Spout/Top|
|5 ltr Rectangular||Rectangular||285mm||Spout/Top|
We supply printed sheets to can makers across the region who either do not have printing facilities or are overloaded in their printing lines. With two printing lines (Yodogawa make) with in-line coating facilities and a dedicated and experienced team led by a Printing Technologist, we are well equipped to take on intricate printing jobs. We have carried out a number of printing assignments given to us by some of the most prestigious food packaging companies in the region.
Deciding on what type of closure to incorporate in a can depends upon various factors and could be a critical issue. The type of closure chosen also depends upon the region where the can is proposed to be sold. In general, the decision on which type of closure to use depends upon its cost, application, convenience to consumers, environmental laws of the region where the can would be sold as well as culture and tradition. We manufacture penny lever lids (also known as a ring, lid & tagger assembly) and other can ends like plain/ clinched ends both for food and non food applications. The ends manufactured by us are
We also manufacture ends for compsite cans. These are manufactured in sizes of 63 mm and 65 mm diameter. These ends are for food applications like potato chips & corn. They are coated with a suitable food lacquer on the inside and clear or gold lacquer on the outside. Unlike ends for metal cans, these ends are lined on the "shoulder", because the seal is required between the inside of the can body and the end.
Besides manufacturing most of our requirment of closures, we also procure some other types of closures (depending upon what our valued customers need) from reputed sources.